ROCK RIVER TOOL, INC.
STANDARD & SPECIAL CARBIDE TIPPED CUTTING TOOLS
Phone (800) 345-8924 | FAX (800) 867-9312
LIMITED WARRANTY
Rock River Tool, Inc. does not give any warranty on its products, except as follows: Rock River Tool, Inc. warrants to original equipment manufacturers, distributors and industrial and commercial users of its products that each new product manufactured or supplied by Rock River Tool, Inc. shall be free from defects in material and workmanship. Rock River Tool, Inc.'s sole obligation under this warranty is limited to furnishing, without additional charge, a replacement for, or at its option, repairing or issuing credit for any such product which shall within one year from the date of sale by Rock River Tool, Inc. be returned freight prepaid to Rock River Tool, Inc. and which upon inspection is determined by Rock River Tool, Inc. to be defective in materials or workmanship. The provisions of this warranty shall not apply to any product which has been subjected to misuse, improper operating conditions, machine set-up or application of cutting fluid or which has been repaired or altered if such repair or alteration in the judgement of Rock River Tool, Inc. would adversely affect performance of the product. Complete written information with respect to all such matters, including operation condition, machine set-up, cutting fluid, cutting speed and feed rate, must be furnished to Rock River Tool, Inc. as a prerequisite to its consideration of any claim or complaint under this warranty.
WARNING -- Because cutting tools may shatter or break, government regulations require the use of safety glasses and other safety equipment at all times in the vicinity of cutting tool use. Grinding of carbide tipped tools will produce carbide and braze dust that may be hazardous to your health. Use adequate ventilation and read the applicable "Material Safety Data Sheets".
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Rock River Tool, Inc. shall have no liability or responsibility on any claim of any kind, whether in contract, tort or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery or use of any product sold hereunder, in excess of the cost of replacement or repair provided herein.
IN NO EVENT SHALL ROCK RIVER TOOL, INC. BE LIABLE FOR ANY SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Rock River Tool, Inc. makes no other warranty, expressed or implied, except the warranty against defects in material and workmanship set forth above; and Rock River Tool, Inc. neither assumes nor authorizes any other person or entity to assume for it any other obligation or liability in connection with any of its products.
WARNING -- Because cutting tools may shatter or break, government regulations require the use of safety glasses and other safety equipment at all times in the vicinity of cutting tool use. Grinding of carbide tipped tools will produce carbide and braze dust that may be hazardous to your health. Use adequate ventilation and read the applicable "Material Safety Data Sheets".