Type 2550 Fractional
Tools - Carbide Tipped Cutters - Milling Cutters and Slitting Saws with an Arbor Hole - Slitting Saws - Course Tooth Slitting Saws (Fewer Teeth) - For Non-Ferrous Materials

Description

  • Very large flute capacity assures good chip flow and permits high feed rates
  • For slitting, slotting, milling, and cut-off operations
  • Tool diameter tolerance: plus 1/16", minus .000"
  • Face width tolerance: plus .001", minus .000"
  • Arbor hole tolerance: plus .001", minus .000"
  • Tool geometry & carbide grade appropriate for material being machined

Options

  • Alternate chamfer every other tooth
  • Corner chamfer or corner radius on one side
  • Corner chamfer or corner radius on both sides
  • Full radius
  • Reduced face width
  • Closer tool diameter tolerance
  • Chip breakers
  • Matched tool diameter set(s)
  • Reduced hub width
  • Additional keyway
Coatings available:
  • TITANIUM NITRIDE - TiN
  • TITANIUM CARBONITRIDE - TiCN
  • ZIRCONIUM NITRIDE - ZrN
  • AL TITANIUM NITRIDE - AITiN
Decimal DiameterFractional DiameterDecimal WidthArbor Hole DiameterNumber Of TeethEDPPrice
6.000060.18751 1/48255065 $414.40
6.000060.25001 1/48255067 $429.25
8.000080.12501 1/410255083 $402.00
3.000030.312516255031 $133.00
3.000030.093816255032 $173.85
3.000030.125016255034 $179.05
3.000030.187516255036 $186.15
3.000030.250016255037 $126.60
3.000030.375016255038 $135.60
4.000040.312516255041 $167.30
4.000040.093816255042 $213.40
4.000040.125016255044 $219.75
4.000040.187516255046 $223.00
4.000040.250016255047 $162.70
4.000040.375016255048 $171.70
4.000040.37501 1/46255049 $171.70
5.000050.093818255052 $230.90
5.000050.125018255054 $230.90
6.000060.12501 1/48255063 $314.45
What are you looking for?