Type 2559Tools - Carbide Tipped Cutters - Milling Cutters and Slitting Saws with an Arbor Hole - Made to Size - General Purpose - 4" Diameter
Description
Radius or Chamfer on One Side
- 14 Teeth
- C-2(m) Carbide
- 5° Positive Radial Rake
- Width Tolerance: +.001"/-.00"
- OD tolerance: +.0313"/-.000"
- 1" Arbor hole +.001"/-.000"
- ANSI Standard keyway dimensions
- Add 5% to grind down hub width
- Add 5% to match OD's on cutter sets within .001"
- Not designed to be used on heat-treated materials greater than 363 Brinell (39Rc)
Radius Notes
- Maximum radius on one side is .2656"
- Full radius and maximum radius on both sides is 1/2 the width of the cutter
- A non-tangent radii must be quoted
Chamfer Notes
- Chamfer Angles can range from 0° to 45°
- Chamfer is measured off the OD
- Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
- Chamfer Angle Tolerance: +/- 1/2°
- Chamfers greater than 45°
Options
Coatings available:
- TITANIUM NITRIDE - TiN
- TITANIUM CARBONITRIDE - TiCN
- ZIRCONIUM NITRIDE - ZrN
- AL TITANIUM NITRIDE - AITiN
| Decimal Diameter | Fractional Diameter | Hub Width | Modified Face Width Range | Number Of Teeth | EDP | 4.0000 | 4 | 0.25 | 0.2344 - 0.2812 | 14 | 255932R2 | 4.0000 | 4 | 0.3125 | 0.2813 - 0.3437 | 14 | 255934R2 | 4.0000 | 4 | 0.375 | 0.3438 - 0.4062 | 14 | 255936R2 | 4.0000 | 4 | 0.4375 | 0.4063 - 0.4687 | 14 | 255938R2 | 4.0000 | 4 | 0.5 | 0.4688 - 0.5312 | 14 | 255940R2 | 4.0000 | 4 | 0.0545 | 0.0600 - 0.0703 | 14 | 255916R2 | 4.0000 | 4 | 0.0701 | 0.0704 - 0.0859 | 14 | 255918R2 | 4.0000 | 4 | 0.0858 | 0.0860 - 0.1015 | 14 | 255920R2 | 4.0000 | 4 | 0.1014 | 0.1016 - 0.1171 | 14 | 255922R2 | 4.0000 | 4 | 0.117 | 0.1172 - 0.1406 | 14 | 255924R2 | 4.0000 | 4 | 0.1562 | 0.1407 - 0.1718 | 14 | 255926R2 | 4.0000 | 4 | 0.1875 | 0.1719 - 0.2031 | 14 | 255928R2 | 4.0000 | 4 | 0.2188 | 0.2032 - 0.2343 | 14 | 255930R2 |