Type 2556

Tools - Carbide Tipped Cutters - Milling Cutters and Slitting Saws with an Arbor Hole - Made to Size - For Steel - 4" Diameter

Description

Radius or Chamfer on Both Sides

• 16 Teeth
• C-5 Carbide
• 1° - 3° Positive Radial Rake
• Width Tolerance: +.001"/-.00"
• OD tolerance: +.0313"/-.000"
• 1" Arbor hole +.001"/-.000"
• ANSI Standard keyway dimensions
• Add 5% to grind down hub width
• Add 5% to match OD's on cutter sets within .001"
• Not designed to be used on heat-treated materials greater than 475 Brinell (50Rc)

Radius Notes

• Maximum radius on one side is .2656"
• Full radius and maximum radius on both sides is 1/2 the width of the cutter
• A non-tangent radii must be quoted

Chamfer Notes

• Chamfer Angles can range from 0° to 45°
• Chamfer is measured off the OD
• Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
• Chamfer Angle Tolerance: +/- 1/2°
• Chamfers greater than 45°

Specify right or left side for radius or chamfer