The left spiral flutes maintain a constant pressure on the work piece and better absorb the impact shock on entering steel.
For milling all types of steel, including hardened steel and other tough steel alloys.
Steel cutting grade flute long carbide tips brazed to hardened tool steel bodies.
Cutting diameter NC tolerance plus .002" minus .000".
Straight shanks with drive flats.
For milling steels and tough steel alloys as indicated. Special steel cutting grade of carbide permits the higher chip loads and higher speeds required for milling steel.
Intermediate decimal cutting diameters.
Radius end.
End chamfer.
Undersize shank diameters.
Tool Diameter |
Dimensions | Type 2310 EDP NO. |
Price | ||||
Shank Diameter | No. of Flutes | Length | |||||
Frac. | Dec. | Carbide | Overall | ||||
1/4 | .2500 | 3/8 | 2 | 1/2 | 2 1/2 | 231008 | $70.40 |
5/16 | .3125 | 3/8 | 2 | 5/8 | 2 1/2 | 231010 | 75.95 |
3/8 | .3750 | 3/8 | 2 | 5/8 | 2 1/2 | 231012 | 80.50 |
7/16 | .4375 | 3/8 | 2 | 1 | 2 11/16 | 231014 | 80.50 |
1/2 | .5000 | 1/2 | 4 | 1 | 3 1/4 | 231016 | 86.70 |
9/16 | .5625 | 1/2 | 4 | 1 | 3 3/8 | 231018 | 93.20 |
5/8 | .6250 | 1/2 | 4 | 1 | 3 3/8 | 231020 | 115.00 |
3/4 | .7500 | 5/8 | 4 | 1 | 3 5/8 | 231024 | 128.10 |
7/8 | .8750 | 5/8 | 4 | 1 1/4 | 4 | 231028 | 154.35 |
1 | 1.0000 | 7/8 | 6 | 1 1/4 | 4 | 231032 | 177.45 |
1 1/8 | 1.1250 | 1 | 6 | 1 1/4 | 4 1/4 | 231036 | 188.20 |
1 1/4 | 1.2500 | 1 | 6 | 1 1/4 | 4 1/4 | 231040 | 227.45 |
1 1/2 | 1.5000 | 1 1/4 | 6 | 1 1/2 | 4 1/2 | 231048 | 276.60 |
1 3/4 | 1.7500 | 1 1/4 | 8 | 1 1/2 | 4 1/2 | 231056 | 333.10 |
2 | 2.0000 | 1 1/4 | 8 | 1 1/2 | 4 1/2 | 231064 | 371.85 |