Die drill -- negative angle cutting edge.
118° included point.
For drilling hardened steel in the range of 35 to 65 Rockwell C.
Flood the cutting point with coolant.
Clear chips frequently.
Light feed with steady pressure.
Will cut without annealing the workpiece
Intermediate decimal and metric diameters.
Special point types and angles.
Undersize shank or flat on shank.
| Tool Diameter |
Length | Type 2670 EDP NO. |
Price | ||||
| Flute | Overall | ||||||
| mm | Inch | mm | Inch | mm | Inch | ||
| 5.0 | .1969 | 38.0 | 1 1/2 | 89.0 | 3 1/2 | 2670050 | $21.45 |
| 5.5 | .2165 | 45.0 | 1 3/4 | 95.0 | 3 3/4 | 2670055 | 23.90 |
| 6.0 | .2362 | 51.0 | 2 | 102.0 | 4 | 2670060 | 24.05 |
| 6.5 | .2559 | 51.0 | 2 | 102.0 | 4 | 2670065 | 25.45 |
| 7.0 | .2756 | 57.0 | 2 1/4 | 108.0 | 4 1/4 | 2670070 | 25.45 |
| 7.5 | .2953 | 57.0 | 2 1/4 | 108.0 | 4 1/4 | 2670075 | 26.60 |
| 8.0 | .3150 | 64.0 | 2 1/2 | 114.0 | 4 1/2 | 2670080 | 28.75 |
| 8.5 | .3346 | 70.0 | 2 3/4 | 121.0 | 4 3/4 | 2670085 | 28.75 |
| 9.0 | .3543 | 70.0 | 2 3/4 | 121.0 | 4 3/4 | 2670090 | 30.60 |
| 9.5 | .3740 | 76.0 | 3 | 127.0 | 5 | 2670095 | 29.00 |
| 10.0 | .3937 | 76.0 | 3 | 133.0 | 5 1/4 | 2670100 | 35.70 |
| 10.5 | .4134 | 76.0 | 3 | 133.0 | 5 1/4 | 2670105 | 41.40 |
| 11.0 | .4331 | 76.0 | 3 | 140.0 | 5 1/2 | 2670110 | 58.25 |
| 11.5 | .4528 | 76.0 | 3 | 140.0 | 5 1/2 | 2670115 | 43.65 |
| 12.0 | .4724 | 83.0 | 3 1/4 | 146.0 | 5 3/4 | 2670120 | 53.30 |
| 12.5 | .4921 | 89.0 | 3 1/2 | 152.0 | 6 | 2670125 | 53.30 |
| 13.0 | .5118 | 89.0 | 3 1/2 | 152.0 | 6 | 2670130 | 61.15 |
| 13.5 | .5315 | 89.0 | 3 1/2 | 152.0 | 6 | 2670135 | 61.15 |
| 14.0 | .5512 | 89.0 | 3 1/2 | 152.0 | 6 | 2670140 | 63.30 |