DOWEL PIN SIZE REAMERS -- CARBIDE TIPPED

STEEL CUTTING -- STRAIGHT FLUTE & STRAIGHT SHANK

TYPE 2486 -- STEEL CUTTING -- STRAIGHT FLUTE & STRAIGHT SHANK

Cutting diameter tolerance plus .0000" minus .0002"

USE:

These precision ground carbide tipped reamers accurately finish dowel pin holes in steels, tough steel alloys and cast irons and result in properly fitted dowel pins subjected to shearing strain -- assuring accurate alignment. Should be used in pairs .0005 and .0020 under fraction size -- Note special minus .0002 tolerance.


Decimal Tool Diameter Dimensions Type 2486
EDP NO.		 Price
Max. Shank Diam. No. of Flutes Overall Length
 .1855  .1805 4 4  1/2  248617 $51.25
 .1870  .1805 4 4  1/2  248618 51.25
 .2480  .2405 4 6         248623 51.25
 .2495  .2405 4 6         248624 51.25
 .3105  .2792 4 6         248630 52.15
 .3120  .2792 4 6         248631 52.15
 .3730  .3105 4 7         248636 53.65
 .3745  .3105 4 7         248637 53.65
 .4355  .3730 6 7         248642 63.00
 .4370  .3730 6 7         248643 63.00
 .4980  .4355 6 8         248648 68.05
 .4995  .4355 6 8         248649 68.05
CASED SET OF ABOVE 12 REAMERS 248600 $644.75